Home Up ENGINES Rochester Fuel Injection Frame Chassis WHEELS Weather-str Transistor Ign Navigation" corvette body BODY Catalog-order Transmission REAR ENDS Exhaust sys Company corvette tilt telescopic steering corvette holley carburetor carbs

 

CRANE’S -HAS BEEN MANUFACTURING - World's Finest.  Exact restoration Big Block valve covers since 1989 - 

FROM CRANE FACTORY TYPE TOOLING. --  with FACTORY PROJECTION WELDED  DRIPPERS -

These are the only Restoration Big Block Chevy Valve Covers made in the U.S.A.  - all others are China, Taiwan, Malaysia, Singapore or one or more of the above, and totally non-fitting Incorrect dog crap.

These are the only one's "Made in U.S.A.

 CRANE’S - HAS BEEN MANUFACTURING   ALL " 14" TYPES -OF BIG BLOCK VALVE COVERS  SINCE 1989. ....  as seen on All the National Level show winning Camaros and Chevelles, and Nova's as well as Corvettes.  Chevy VetteFest Nationals, Chris Daniels Restorations,  "Bloomington Gold" and NCRS top flight cars and Camaro and Chevelle Nationals show cars  !!   Exacting in all details  - even with  the draw lines ,  the projection welds that pop-up from the drip-rails  and correct stands and  wire clips.  

gymnastics bikini fitness models

 gymnastics bikini fitness models

FROM CRANE  FACTORY TYPE TOOLING. --  with FACTORY PROJECTION WELDED  DRIPPERS 

FROM 1965-74 CALL FOR YEAR AND APPLICATION. - CORVETTE

CAMARO, CHEVELLE, PASSENGER CARS.

VALVE COVER 427 RETAINERS AVAILABLE IN QUANTITY...100 ‘s AVAILABLE ..CALL...fasteners, grommets, spark plug clips.

ORDER LINE::::::::::::::::::::   :858-864-2883

:::::::::::::::::::::::::: FAX::::::::::::::::::::::: 858-514-8398

BIG BLOCK-----TOLL FREE 888-427-VETT

MANY NEW PHOTOS - at bottom of page

 

  Below is a 1971 L.H fully detailed

all photos  are © and property of Crane's Corvettes.

Below is a close up of the Exact 1967-69  "CAMARO" Big Block valve cover with Correct Brackets/flanges/nub.    NOTE:  THE TALL BENT BRACKET IS MOVED FORWARD OF THE BOLT HOLE FOR FIREWALL/wiper motor  CLEARANCE.- Correct according to the National Camaro Judges.  There are 3 versions on the clip locations depending on the year. 

Below is a close up of the Exact 1968-69 CORVETTE Big Block valve cover with Correct Brackets/flanges/nub.

  • BASE ENGINE HAS NO DRIPPERS-ON PASS. CARS..    ..BUT  *HI-PERF ENGINES HAVE DRIPPERS-- 
  • *SPECIAL HI-PERF HAS DRIPPERS  etc. 

THERE ARE : DIFFERENT POWER BRAKE CORNER SHAPES: 

  PICTURED  ABOVE LEFT TO RIGHT + the 68-69 Camaro cover on "far right." w/tall bent bracket moved forward of the bolt hole.   "Camaro"

1* 1965-67 & 68E CORVETTE AND PASS. ; ALL—SMASHED/CRUNCHED  CORNER power brake shape

2 & 3  1968-69 ALL; 60 DEGREE RAKE WITH BUMP IN CORNER  

4 *1970-74 ALL. –RAKED EVENLY WITH SMALL CREASE AT BOTTOM. 

 THE VALVE COVER ON THE RIGHT IS CAMARO 1968-69 (same power brake 

shape as #3 above) WITH BRKT MOVED FORWARD OF THE BOLT HOLE FOR FIREWALL CLEARANCE. =

v1.jpg (29301 bytes)

  •   SAMPLE PHOTOS BELOW THIS PART NUMBER CHART
  • NOTE:  VETTES 
  •  
  •   All Corvettes, Camaros, Chevelles etc. HAD POWER BRAKE VALVE COVERS with or without the PB  option.

   all  CHROME COVERS ARE:   $450 pr.    OR  LH= $225    RH=  $225

Most PAINTED Type are:  $325 pr.  OR   LH  = $175      RH= $175

1966 AIR COND DENT ,R.H. SEPT.65-JAN-1966======= ADD $50

1967 A.I.R. -SMOG --BRKT RH --INSTALLED K-19 =====ADD $50

  ORDER BY   PART #                   APPLICATION        P= pair

#V65-6CP===   396-427 CHROME-  Z-16 CHEVELLE  AND 66 ALL CHEVELLE396/427 AND PASSENGER CAR 396/427-UNIQUE POWERBRAKE CORNER SHAPED-SIZE OF A U.S. SILVER DOLLAR.

----------------------------------=========CORVETTE & CHEVELLE & PASS. CARS.--------------------

#V66P-AC=PAIR PB. DRIPPERS W/AC DENT IN RH COVER.-OCT.65-JAN.66.-- BARE-TO PAINT-

#V65-6P = PAIR--CORVETTE 1965-66 BIG BLOCK PB W/ DRIPPERS -BARE TO PAINT-

#V67P===PAIR--BB , Corvette ’67 , L-88 ALLW/ TALL BENT BRKT, -BARETO PAINT-

#V67-8P==V67-8CP= CHROME=1967  & EARLY ' 68 TO JAN. 1968. VETTE, 

& BB FULL SIZE.; & 1967 L-89 CORVETTE, & 1967 -68E C.O.P.O & L-89 & ZL-1,

CAMARO-NICKEY & BILL THOMAS, MOTION CHEVELLE, CAMARO.etc.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

V68-9P =  JAN.'68 AND ON THRU ALL 1969, BB CHROME CORVETTE AND PASS. CAR, CHEVELLE

V68-9U ===1968-69 BARE-TO PAINT—PASS. FULL SIZE CHEVROLET

V68-9CP

V70-71P== CHROME—1970,AND EARLY ‘71 CHROME TO CAR #4,000 Corvette, Chevelle, etc,  & LS_6   –SEE PART #V71P=C

V71P ==- BARE-TO PAINT--((PUSH IN OIL PLUG) AFTER S/N 4,000 AND LATER………

V71P-C-- = CHROME -EARLY ‘71 TO CAR #4,000 VETTE- ((PUSH IN OIL PLUG)

 # V72-74P=NEW $325/PR=WITH 4 INDIVIDUAL CLIPS INSTALLED

 ON EXHAUST MANIFOLD SIDE.—BARE-TO PAINT -VETTE AND PASS. -ALL CHEVY’s

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^CAMARO^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

  W/ TALL BENT BRKT MOVED TO FORWARD LOCATION .USED ON ALL C.O.P.O &    ZL-1  &  L-89 CAMAROS/ NOVA-NICKEY AND BILL THOMAS, CAMARO/NOVA.

V67P-CC  =1967 CAMARO - CHROME

V67P-CU = 1967 CAMARO -UN-CHROMED FOR 325 AND 360HP CAMAROS

V68P-CC = 1968 CAMARO - CHROME -   

V68P-CU = 1968 CAMARO -NON CHROME  FOR 325 AND 350HP

V69P-CC = 1969 CAMARO CHROME-    DRIVER SIDE HAS ONE CLIP ON EXH. SIDE FOR TEMP WIRE.

V69P-CU = 1969 CAMARO NON CHROME 

P = PAIR             

C= CHROME 

===^^CAMARO^^^^^^^^==PICTURED BELOW===============

click here: Used Big Block Valve Covers 

Also: 283  & 327 originals available steel &finned aluminum..call 800-597-4132.

Below are photos of the 1971  454 valve covers and all  their features.

 

 

Below is a  pair of 1968Late (jan. 68)  thru all -1969  part number =  V68-9P    Corvette - Chevelle-  Nova &  Pass. cars. COPO &  ZL-1

 

 

     ORDER LINE::::::::::::::::::::: PH: 800-597-4132

  "NEW" FRAMEWORLD = toll free 888-427-8388

:::::::::::::::::::::::::: FAX::::::::::::::::::::::: 858-514-8398

Below are  1972-1974     454 valve covers 

w/the  4 individual  spark plug wire clips on the side.

 

+Crane Corvette Supply amflag.gif (12532 bytes)   2ENG2.jpg (83841 bytes) 

     "NEW:" USED PARTS toll free: (858) 514-8388

  CRANE MANUFACTURING INC.--   600 Ton press  == "MINI - TERMINATOR "aa-2machine.jpg (13387 bytes) 

MANUFACTURING CENTER- FOR THE MOST EXACT   REPLICA PARTS FOR YOUR  prized CORVETTE!  +  Used parts  858-864-2883 

 

For More Information Contact:  

E- mail
Sales:  corvette4u@aol.com 

gymnastics bikini fitness models

gymnastics bikini fitness models
 gymnastics bikini fitness models

CRANE'S CORVETTE SUPPLY
4687 CHATEAU PLACE, SAN DIEGO, CA. 92117
Tel: 858-864-2883
FAX: 858-514-8398
Internet: corvette4u@aol.com\

 
Postal/shipping   address:CRane     Corvettes 4687 Chateau place    San Diego,  Ca.   92117

 

Contact:  E-mail:    NEW PHONES:    

ORDER LINE::::::::::::::::::::   :858-864-2883

:::::::::::::::::::::::::: FAX::::::::::::::::::::::: 858-514-8398

BIG BLOCK-----TOLL FREE 888-427-VETT

CELL/Mobile COMMAND CENTER:::::858-864-2883

 


 

 

Home ] Up ]
Last modified: June 09, 2011